Bike - Adhesive
| Chemloc |
anaerobic adhesives / sealants |
|
|
| Chemloc U-900 |
colour: red |
 |
High
strength threadlocker, standard-type, recommended for permanent thread
locking, also suitable for oily surfaces. screw fastening to max. gap fill: M20 0,15 mm viscosity (25°C mPa.s): 500 touch strength in minutes: 10 - 20 min operating strength in hours: 1 - 3 hrs |
| Article No.: 900 006 | 10 g | 24 pcs/carton |
| Article No.: 900 050 | 50 g |
individual |
| Article No.: 900 250 | 250 g |
individual |
| Chemloc S-242 |
colour: dark blue |
 |
Medium
strength threadlocker, recommended for oily surfaces. screw fastening to max. gap fill: M24 0,25 mm viscosity (25°C mPa.s): 2000 - 7500 touch strength in minutes: 10 - 20 min operating strength in hours: 1 - 3 hrs |
| Article No.: 901 010 | 10 g | 24 pcs/carton |
| Article No.: 901 050 | 50 g |
individual |
| Article No.: 901 250 | 250 g |
individual |
| Chemloc S-270 |
colour: red |
 |
Capillary action. Designed for post applied threadlocking or for sealing metal porosities. High-strength standard-type, recommended for permanent fastenings, for stay bolts, screws and for locking cylindrical parts. Disassembly possible by exposure to 100°C to 150°C. screw fastening to max. gap fill: M20 0,15 mm viscosity (25°C mPa.s): 500 touch strength in minutes: 10 - 20 min operating strength in hours: 1 - 3 hrs |
| Article No.: 902 050 |
50 g |
individual |
| Article No.: 902 250 |
250 g |
individual |
| Chemloc D-542 |
colour: brown |
 |
Designed for sealing and retaining screw fastenings. Medium strength sealant for bolted joints and pipe-joints in pneumatic and hydraulic functions. Fast Sealing and retaining. Fast cure with non-ferrous metals. Gewindeverbindungen bis max. Spalt: M203/4 0,15 mm Viskosität 25°C mPa.s: 500 Handfestigkeit in Minuten: 10 – 20 Min. Funktionsfestigkeit in Stunden: 1 – 3 Std. screw fastening to max. gap fill: M20 3/4 0,15 mm viscosity (25°C mPa.s): 500 touch strength in minutes: 10 - 20 min operating strength in hours: 1 - 3 hrs |
| Article No.: 904 050 | 50 g | individual |
| Article No.: 904 250 | 250 g | individual |
| Chemloc B-601 |
colour: green |
 |
Extremely fast cure, high strength, allows higher work tolerance. High strength assembly fastening with cylindrical parts and bushings, gearwheels, bearings, bolts, pressfit assemblies etc. Gives 100 % surface contact and prevents fretting corrosion screw fastening to max. gap fill: M20 3/4 0,15 mm viscosity (25°C mPa.s): 500 touch strength in minutes: 2 - 5 min operating strength in hours: 1 - 3 hrs |
| Article No.: 905 050 | 50 g | individual |
| Article No.: 905 250 | 250 g | individual |
| Chemloc B-641 |
colour: dark yellow |
 |
Medium strength assembly fastening for pulleys, keys, bolts, bearings and bushings. Light pressfit assemblies, that are to be easy removable. Gives 100 % surface contact and prevents fretting corrosion. Easy Disassembly. screw fastening to max. gap fill:M20 0,12mm viscosity (25°C mPa.s): 550 touch strength in minutes: 10 - 20 min operating strength in hours: 1 - 3 hrs |
| Article No.: 906 050 | 50 g | individual |
| Article No.: 906 250 | 250 g | individual |
| Bondex |
instant adhesive |
| Instand bond cyanacrylate adhesive with high bond strengths. Suitable for bonding a wide variety of materials in nearly all combinations. Bonding performance within the range of -50°C to +80°C. |
| Bondex U-20 | |
 |
Universally
applicable adhesive for repair and series. Bonds also absorbing and
porous surfaces. Rapid cure with most materials. Bonds – and to
themselves – ceramics, rubber, metal leather etc. High tensile
strength.
viscosity (20°C mPa.s): 100 - 150 max. gap fill (microns): 10 - 150 tensile strength DIN 53288 (N/mm2): 22 - 25 tensile shear strength DIN 53288 (N/mm2): 15 - 20 impact shear strength ASTM D 950 (N.mm/mm2): 15 - 20 |
|
Article No.: 920 010 |
20 g |
24 pcs/carton |
| Bondex U-25 | |
 |
Formulated
particularly for bonding solid rubber, foam rubber, EPDM-elastomere and
difficult bonding rubber and plastic.
viscosity (20°C mPa.s): 30 - 60 max. gap fill (microns): 10 - 100 tensile strength DIN 53288 (N/mm2): 18 - 25 tensile shear strength DIN 53288 (N/mm2): 15 - 20 impact shear strength ASTM D 950 (N.mm/mm2): 15 - 20 |
|
Article No.: 925 010 |
10 g |
24 pcs/carton |
|
Article No: 925 020 |
20 g |
24 pcs/carton |
| Bondex U-26 | |
 |
Large
gap filling viscosity, slow cure and high strength. Recommended for
rubber, plastic, metal and ceramics.
viscosity (20°C mPa.s): 300 - 500 max. gap fill (microns): 10 - 150 tensile strength DIN 53288 (N/mm2): 18 - 23 tensile shear strength DIN 53288 (N/mm2): 13 - 18 impact shear strength ASTM D 950 (N.mm/mm2): 15 - 20 |
|
Article No.: 926 020 |
20 g |
24 pcs/carton |
HOME