safe protection against wear out

Seize–Ex is a heat-resistant lubricant and anti-corrosion agent to be applied before mounting of parts, i.e. pins, threads, flanges, gaskets, to prevent parts from seizing caused by chemical or thermal influences. Seize-Ex makes disassembly quick and easy.

• reduces friction and wear out
• effective from -180°C to +1200°C
• salt water resistant

lubricant and protective agent

CU 1200 is a pleasing gold-coloured copper-paste containing soft metals. It prevents threaded fasteners from seizing and is effective at high temperatures up to +1200°C and under corrosive conditions.

CU 1200 acts as a non-melt grease for slow heavy-duty mechanisms at permanent temperature up to 160°C. It also remains effective at temporary higher temperatures .

• reduces fretting corrosion
• temperature range from -40°C to +1200°C
• resistant to 10 % hydrochloric acid and to saturated brine

 transparent adhesive lubricant

Bio-degradable, high pressure-resistant and adhesive substance for the clean and precise lubrication of chains, booms, gear rims, hinges, cable controls, gear wheels, racks, sliding rails, door pins, steering bar heads etc.

After immediate evaporation of the solvent an extremely adhesive, transparent film stays, which exhibits good high pressure and high temperature properties. Water- and weather-proof.

Durable lubrication is guaranteed also in constant contact with water. The lubricating of inaccessible parts is ensured by optimal creep properties. Lubex shows a good long-term effect and corrosion protection.

• high adhesive power and centrifugal resistance
• temperature range from -30°C to +200°C
• excellent creep properties
• saltwater resistant

lubricates, protects, loosens

High quality mineral oil with high-grade additives. This chemically optimized lubricant is unique in design to provide outstanding performance. Versatility and reliable long-term performance make this product to one of the best.

• sprays in all positions (ball valve)
• never becomes gummy or sticky
• free from acids, sulphure and silicone
• high creep properties, UV-resistant
• reduces friction, temperature and wear out
• proved rust and corrosion protection according to DIN No 51 585 AIB
• excellent heat resistance (-35°C to +500°C, short-term up to +1060°C)
• chemically neutral towards plastic or sealing material
• shelf-life in container: 10 years  

Precise long-term lubrication, showing also excellent anti-corrosion properties and optimal creep properties. Neoval MTO 300 penetrates even to inaccessible lubricating points. Lubricates all kinds of movable plastic or metal parts, particularly in dust-contaminated branches like woodworking, textile and paper industries. Treated parts stay clean and protected, Neoval MTO 300 does not attract dust. It is an ideal cutting agent and coolant in machining and non-cutting processing with metals and plastics, and is excellent applicable as parting agent on injection moulds and casting moulds.

 lubricates, protects, solves and cleans

UNI 400 – the universal spray with excellent multi-functional properties. It is suitable for the fast loosening of corroded screw connections, pins and machine components. It displaces water, thus makes it suitable for wet parts and machines. UNI 400 is silicone-free and is excellent useful for the degrease of all kinds of preserved profiles.

• rapid rust loosening
• facilitates the disassembly 
• eliminates screeching noise 
• binds acids on metal surfaces
• temperature range from -30°C to +180°C

synthetic sliding agent and lubricant

Slidex is a clear-liquid, synthetic sliding agent  and lubricant with excellent creep properties. It offers best corrosion protection for metals. Owing to the high electrical resistance Slidex suppresses spread electricity and leakage current. It does not contain silicone, wax, graphite or petroderivatives. It is used successfully in the entire metal and woodworking branch. In woodworking Slidex removes fresh resin and protects with sustained effect against build-up of resin. Slidex is oil-free, thus ensures over-staining and over-painting of wood. Slidex has proved successful also as parting agent in plastic-processing. 

• displaces humidity and forms a protective film. 
• forms a dry, non-greasing lubricating film.
• temperature range from -70°C to +240°C

sliding agent, parting agent, lubricant

Silikon-Spray is a sliding and parting agent and is suitable for use on all surfaces such as metal, plastic, rubber, fabric, wood and leather. The clear, transparent film gives weather protection, does not melt, does not freeze on and does not become sticky. Multi-purpose lubricant, particularly applicable on plastic and metal surfaces.

• prevents oxidation
• protects against humidity and leakage current.
• water-repellent, non corrosive
• electrically insulating
• temperature range from -50°C to +200°C

Alu-Zink

Zinc-rich fluid for cold galvanizing, provides excellent corrosion protection.

Useable for exhaust systems, heat exchangers, lubricant coolers and other components subjected to high temperatures. Alu Zink is also suitable for the retreatment of hot-dip galvanized surfaces and for car repair, i.e. applied as undercoat on all kinds of body components. Only for use on metallic, totally degreased and barely abraded surfaces.

Shake well before use. Spraying distance 20 – 30 cm. After use turn can upside down and spray to clear nozzle 

• fast drying
• over-weldable
• long-term temperature 350°
• smooth non-porous film
• air-dry in 5-7 minutes

Galva-Zink

Galva-Zink is a zinc rich coating for the active cathodic corrosion protection. Recommended for reworking weld-seams and faulty spots on hot-dip galvanized zinc layers. Air-dry in 5 to 7 minutes, handling dry in 20 – 30 minutes, fully dried after 24 hours.Over-paintable after 15 – 30 minutes with any synthetic paint. Only for use on metallic, totally degreased and barely abraded surfaces.

Shake well before use. Spraying distance 20 – 30 cm. After use turn can upside down and spray to clear nozzle 

• contains 99 % pure zinc pigment
• smooth, non-porous coat
• spot welding capability
• heat resistant, (limited) up to +500°C
• weatherproof with intermediate layer and top coat
• salt-water-mist tested: 500 hours according to DIN SS-50021

Neoval Rustguard

Neoval Rustguard contains high grade additives that forms  - after fast evaporation of the carrier substance - a dry waxy protective film on metal surfaces. This film displaces and seals out water and does not tie down dust. The structure of Rustguard makes its removal unnecessary before painting or galvanizing machine components, plates and profiles. 

• does not emulsify
• forms a thin, handperspiration-proof coating
• does not attack painted machine surface 
• used as immersion bath it causes the water to deposit on the bottom. Afterwards the water can be drained separated as required

Kontrolit

Non-polluting, aqueous fluid for the fast and casual finding of leakages at pressure vessels, gas lines, water pipelines, valves, brake assemblies and at compressed air systems. It is non-greasing and protects against corrosion. Kontrolit does not react with gases or refrigerants. It is both suitable for combustible gases and for oxygen. 

• high-grade corrosion protection
• DVGW-release number for all kinds of gas
• food genuine
• sprays in all positions
• non-flammable