Eurotech W. Vogel Handels- GmbH

Industry

Craft

Automotive

Bike

Automotive - Sealant / Adhesive

RTV 108

silicone adhesive

RTV 108 is a ready for use translucent silicone adhesive and sealant. The name RTV (vulcanizing at room temperature) shows that this product cures at room temperature and normal humidity to a strong, permanent and durable-flexible silicone-elastomere.

RTV 108 provides excellent electric properties. It acts insulating immediately after application and does not loose this property even at extremely varying temperatures.

can replace old solid seals when maintaining and servicing machines, i.e. case covers, gears, flanges and gearboxes
seals oil tanks, thermostat casings, gearbox covers
excellent adhesion to glass, metal, various plastics, wood
resistant to ozone, UV-rays, hydrochloric acid 50 %, sulphuric acid 50 %, saturated brine, ammoniac, oil, petrol, methanol
temperature range -60°C to +250°C

Article No.: 839 085	85 g	tube	24 pcs/carton
Article No.: 839 340	300 g	cartridge	24 pcs/carton

Chemloc	anaerobic adhesives / sealants
	Anaerobic adhesives / sealants for the requirements: retaining – locking – sealing. The wide range of products satisfies individual requirements. Effective from -55°C to +150°C.

Chemloc U-900

colour: red

High strength threadlocker, standard-type, recommended for permanent thread locking, also suitable for oily surfaces.

Retains bolted joints against vibration and impact with high strength. Applicable for bolts, nuts and crew threads.

screw fastening to max. gap fill: M20 0,15 mm

viscosity (25°C mPa.s): 500

touch strength in minutes: 10 - 20 min

operating strength in hours: 1 - 3 hrs

Article No.: 900 006	10 g	24 pcs/carton
Article No.: 900 050	50 g	individual
Article No.: 900 250	250 g	individual

Chemloc S-242

colour: dark blue

Medium strength threadlocker, recommended for oily surfaces.

Conform to KTW for drinking water.

Retains bolted joints against vibration and impact with medium strength, useable for screw threads, bots, nuts, pneumatic screw fastenings.

screw fastening to max. gap fill: M24 0,25 mm

viscosity (25°C mPa.s): 2000 - 7500

touch strength in minutes: 10 - 20 min

operating strength in hours: 1 - 3 hrs

Article No.: 901 010	10 g	24 pcs/carton
Article No.: 901 050	50 g	individual
Article No.: 901 250	250 g	individual

Chemloc S-270

colour: red

Capillary action. Designed for post applied threadlocking or for sealing metal porosities.

High-strength standard-type, recommended for permanent fastenings, for stay bolts, screws and for locking cylindrical parts. Disassembly possible by exposure to 100°C to 150°C.

screw fastening to max. gap fill: M20 0,15 mm

viscosity (25°C mPa.s): 500

touch strength in minutes: 10 - 20 min

operating strength in hours: 1 - 3 hrs

Article No.: 902 050	50 g	individual
Article No.: 902 250	250 g	individual

Chemloc D-542

colour: brown

Designed for sealing and retaining screw fastenings.

Medium strength sealant for bolted joints and pipe-joints in pneumatic and hydraulic functions. Fast Sealing and retaining. Fast cure with non-ferrous metals.

Gewindeverbindungen bis max. Spalt: M203/4 0,15 mm

Viskosität 25°C mPa.s: 500

Handfestigkeit in Minuten: 10 – 20 Min.

Funktionsfestigkeit in Stunden: 1 – 3 Std.

screw fastening to max. gap fill: M20 3/4 0,15 mm

viscosity (25°C mPa.s): 500

touch strength in minutes: 10 - 20 min

operating strength in hours: 1 - 3 hrs

Article No.: 904 050	50 g	individual
Article No.: 904 250	250 g	individual

Chemloc B-601

colour: green

Extremely fast cure, high strength, allows higher work tolerance.

High strength assembly fastening with cylindrical parts and bushings, gearwheels, bearings, bolts, pressfit assemblies etc. Gives 100 % surface contact and prevents fretting corrosion

screw fastening to max. gap fill: M20 3/4 0,15 mm

viscosity (25°C mPa.s): 500

touch strength in minutes: 2 - 5 min

operating strength in hours: 1 - 3 hrs

Article No.: 905 050	50 g	individual
Article No.: 905 250	250 g	individual

Chemloc B-641

colour: dark yellow

Medium strength assembly fastening for pulleys, keys, bolts, bearings and bushings.

Light pressfit assemblies, that are to be easy removable. Gives 100 % surface contact and prevents fretting corrosion. Easy Disassembly.

screw fastening to max. gap fill:M20 0,12mm

viscosity (25°C mPa.s): 550

touch strength in minutes: 10 - 20 min

operating strength in hours: 1 - 3 hrs

Article No.: 906 050	50 g	individual
Article No.: 906 250	250 g	individual

Bondex	instant adhesive
	Instand bond cyanacrylate adhesive with high bond strengths. Suitable for bonding a wide variety of materials in nearly all combinations. Bonding performance within the range of -50°C to +80°C.

Bondex U-20

Universally applicable adhesive for repair and series. Bonds also absorbing and porous surfaces. Rapid cure with most materials. Bonds – and to themselves – ceramics, rubber, metal leather etc. High tensile strength.

viscosity (20°C mPa.s): 100 - 150

max. gap fill (microns): 10 - 150

tensile strength DIN 53288 (N/mm2): 22 - 25

tensile shear strength DIN 53288 (N/mm2): 15 - 20

impact shear strength ASTM D 950 (N.mm/mm2): 15 - 20

Article No.: 920 010

20 g

24 pcs/carton

Bondex U-25